Pneumatic Dispensing Controller Glue Dispenser Solder Liquid Controller 982, Glue Dispenser Machine Solder Paste Controller Glue Dropper

<p>Description</p> <p>Semi-automatic Glue Dispenser Machine</p> <p>Are you affected by the slow speed of traditional drip glue, which affects productivity? Are you often wasting a lot of glue material? Do you feel that the precision of glue dripping is low and difficult to control? Choose this semi-automatic glue dispenser machine, which can precisely control the dripping speed and improve the working efficiency, bringing you a more efficient and energy-saving working experience!</p> <p>&nbsp;</p> <p>Details</p> <p>&nbsp;</p> <p>Anti-slip&nbsp;Feet: The bottom has&nbsp;anti-slip&nbsp;feet so that the product is placed more stable and does not easy to fall down and slip.</p> <p>&nbsp;</p> <p>Rounded Corners: The corners have been polished to become smooth and rounded, reducing the risk of you being accidentally bumped at work.</p> <p>&nbsp;</p> <p>Application</p> <p>It is suitable for most of the yellow glue, quick-drying glue, epoxy resin, etc. in the market, and is widely used in bonding various electronic components, machine production, instrumentation, jewelry, and other objects.</p> <p>&nbsp;</p> <p>Specification</p> <p>Color:&nbsp;Black</p> <p>Model: 982</p> <p>Material: Metal</p> <p>Spitting Mode: Manual / Semi-automatic</p> <p>Minimum Drip Volume: 0.01ml</p> <p>Spitting Time Interval: 0.1-9.9s</p> <p>Automatic Timing(Can Be Set): 0.01-30s </p> <p>Repeat Accuracy: ±0.5%</p> <p>Internal Voltage: 12-24DC</p> <p>Input Air Pressure: 2.5-7bar(35-100psi)</p> <p>Output Air Pressure: 0.1-5.5bar(1-78psi)</p> <p>Power Supply: 110V AC, 60Hz </p> <p>Power Consumption: 20W</p> <p>Plug Specification: American Standard 110V</p> <p>Product Size:23*15*6cm/9.05*5.9*2.36in</p> <p>Package Size:20*26*14cm/10*9*12.5in</p> <p>Gross Weight: 2.1kg/4.63 lbs</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>Package Included</p> <p>1* Dispenser Main Unit</p> <p>1* Manually Switch</p> <p>1* Foot Switch</p> <p>1* Air Tube</p> <p>1* Connection Tube</p> <p>1* Power Cord</p> <p>1*Dispenser Stand</p> <p>2* 30CC Liquid Barrels</p> <p>6* Dispensing Needles</p> <p>1* Chinese and English Manual</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>Notes:&nbsp;</p> <p>1.&nbsp;The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.</p> <p>2.&nbsp;If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.</p> <p>3.&nbsp;When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent.</p> <p>4.&nbsp;Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation. </p> <p>5.&nbsp;Automatic state work, according to the actual situation, timely removal of the material left at the needle nozzle, these materials gradually curing will block the muzzle discharge and back pumping; after work, the barrel should be cleaned in time, otherwise, the barrel's disassembly will be very difficult.</p> <p>6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.</p>